Search results

I do have NOS 7 speed cassettes in 12-28, 12-30, and 13-30. The cassettes with 30T cogs are black, the 12-28 is silver Accushift Plus II.

I'd forgotten that the Omega was SunTour. Does the wheel have a freewheel hub? Is the frame 130 or 135 mm spaced?

I know that I have NOS SunTour 36 hole cassette hubs but they are not XC Pro. Probably 130 mm but I would have to check. 1991 was about the year that SunTour introduced the Microdrive compact crank, but they also made standard (28-38-48, etc) cranks at the same time. The 1991 catalog shows...

I probably have a NOS cassette. 7 or 8 speed? Might have hubs but they won't be NOS. What front derailleur - clamp size, standard or Microdrive? Guessing 32 clamp and bottom pull if for a Cannondale.

I have a 1997 CAAD2 frame here in the stand. It has a plain black chainstay protector, essentially a black version of the helicopter tape. I don't know if it's original to the frame or not, but looking at the yellow bikes in the 1997 catalog it doesn't appear that they came with anything on...

Whether you need it or not depends on how rough your roads are and the gear combinations that you spend a lot of time in. Certainly wouldn't hurt to protect the stay though. We always used 3M helicopter tape to protect the front edges of wings on the race cars. It will yellow over time but...

PM Brian if he doesn't chime in. Velocals decals are vinyl I think but thin enough to be clear coated. They probably have reasonably close down tube, head tube, fork, and possibly made in USA decals. https://velocals.com/cannondale-build-a-set/?sort=featured&page=1

Looks great. Current Sora is so much nicer than it used to be.

Perhaps Brian will chime in. Have you looked around at velocals? They probably won't have a model decal but might have the same style of down tube decals, and might have a color that is close.

I'd be interested in the shifter bosses if they list them. I don't see them yet. Thanks.

They didn't give me a very good deal on a quantity of them unfortunately. Where are you located? I could still order a pair and drill and tap them for you if the shipping makes sense.

I have contacted the ebay seller (that I posted in the other thread) about buying a quantity of the stops. I can drill and tap them.

Look around for a bike shop that was selling Cannondales in the 1990s. Dealers had frame parts kits that would have had the stops. Another option would be to look for a trashed donor frame - bike co-op, craigslist, swap meet, flea market, etc. This one should work if you drilled and tapped...

Looks like your bike is a 2005 Euro spec F1000 SL. I tried to post links but they do not work. Go to our catalog page, cllick on 2005 EU catalog, then click mountain bikes, XC Racing, and F1000 SL. There is a small photo showing the Siemens top tube paint. It's just like your bike.

There was a Siemens Team Replica F4000 SL in 2004 but the 2004-2006 F4000 SL came with a lefty fork while the F2000 SL had a Headshok. Does your bike have the bar code sticker on the bottom bracket shell? That would at least pin down the year of manufacture. It's not unusual for bikes to...

That fork decal appears on 2005 Six13s. Sometimes the decals are a better indicator than the paint. I would check the catalogs from 2004-2006 and look for matches of components. It's not unusual for Cannondales to turn up with paint that doesn't show in the catalogs.

I am not sure about the range of years of the Siemens bikes, but there is one pictured in the 2006 catalog. It appears that the CAAD designation doesn't appear on the MTBs after 2003 at least in the catalogs.

I suggest that you send a PM.

Glad to hear you got it operational.

I don't think adding a washer under the nut would work, at least with a Shimano cable adjuster. I measure the depth of the recess on the back side of the adjuster at .48", almost exactly the same as the height of the nut.