Wanted 1990 Cannondale SM 400, 600, 700, 1000 or 2000 frame + 1" Pepperoni

[Brotrob]

Hi all,

I'm once again looking for a needle in a haystack (or actually two), and am therefore turning to the community with hope:

• 1990 3.0 frame in size 20"
• Pepperoni fork with 1" steerer (long enough for a 20" frame or longer)

Paint scheme and condition are completely irrelevant, but the frame should have no cracks or major dents. They were used in the following bikes:

• SM2000
• SM1000
• SM700
• SM600
• SM400

For easier identification: the frames already had the extended dropouts (unlike in 1989), but still had the brake cable housing routed along the top tube and attached in three places, as well as the "dimpled" seat stays (unlike from 1991 onwards):

Regarding size: I am looking for this size - completely straight top tube, around 54 cn C-C:

Thank you!

 

[black lightning 1987]

I might have something one year off either way. Will need to check. PM me if I don't respond here.

 

[Brian]

I have a silver ‘91 1” from a SE/SM1000. It is from a 17” small frame.

You could have somebody extend it. I have another fork and was thinking about do this.

 

[radio_silence]

Rate to ship a frame from Edmonton Alberta Canada to Germany is $320 USD.

A third of the cost may be tariff for using bikeflights.com - a US company- from inside Canada.