CODA MTB Parts Needed...

Zachariah

Well-Known Member
I’m looking for Vintage CODA MTB parts:
1) CODA 25.4 x 120mm black or silver, one-bolt steerer stem 0-12 degree rise

2) CODA Tarantula TX2 or TX3 crankset in any color, Octalink or square taper BB fine

3) CODA black, red or yellow grips

4) CODA SPD clipless pedals MTB

5) CODA 1000 saddle Titanium rails
 
Last edited:

black lightning 1987

Moderator
Staff member
Is the stem for a Headshok or rigid fork? I have several NOS Headshok stems. Can't recall off hand what lengths/rises. They are at a friend's house in STL.

The Coda saddles were made in MTB and road models, the MTB having kevlar fabric on the rear corners. I have a 1000 here somewhere that I bought for my 1998 Silk Road 1000, not sure which design it is. You might consider the 900 model, as it only weighs 20 grams more.

I have a PX3 right crank arm, black, square taper, 175 mm. Been looking for the left arm for a while now.

I might have a clamp on a road frame. I could use another brand if you don't find one elsewhere. It appears that many MTB models used the same slotted clamp as the road bikes. I've seen some pictures of Volvo team bikes that appear to have a solid clamp with a logo on the front.
 
Top