Search results

Isn't it a conventional 1 1/8" stem?

I don't think the bike is original. The Lefty didn't come out until the 2000 model year, the same year that the Raven frame was updated. Your frame and fork look to be from 1998, although the US catalog shows a yellow swingarm on the 3000 and a black one on the 4000. I think the idea of the...

The 7 speed X-1 rear derailleur was used at least from 1990-1992, same model number. There are a number of derailleurs that would be functional replacements, including: XCT, XCM, XCE, XC LTD, XCD, XC Comp, and XC Pro (lower groups to higher). I suspect that there are several from the 6 speed...

First one of these I've seen outside the catalog, but have seen a couple of older XS800s. Great color, I'd love to have one but this one is too small. It's listed as 19" which would make it a 50 or 52, but by the standover it's a 54 cm. Hopefully the seller will clarify the size...

Those tires are an unbelievably close match to the team blue. I wish your F400 was the same size, I'd be interested in it if it were. I agree that used is the way to go. I've probably owned 25 or 30 Cannondales, only 4 were purchased new.

For me I think it would depend on how bad it is, and if the aluminum is corroding. I had a CAAD9 frame that wasn't very old but had spider web-like corrosion under the clear. It never bubbled the clear coat but it didn't look too great. I ended up selling it before doing anything with it. If...

I assume you meant 1996. If Brian doesn't have anything, there are some single decals here: https://velocals.com/search.php?search_query=cannondale This R500 set has the 2.8 and head tube decals. https://velocals.com/cannondale-r500-bicycle-decal-set/

I doubt that you could fit 700c wheels to a frame made for 650s. You might be able to do the opposite with long reach calipers.

Lots of Jekylls came with Leftys, so my guess is that it's a straight swap. For an expert opinion check with MendonCycleSmith. I can't help with advise on the shock. Brian might have an opinion.

Nice collection. What happened to the Trek? Too bad we ride such different sizes. I have a very nice 1992 (first year I think) 5500 here that I could part with but it's a 58 cm. Here it is as I purchased it about 10 years ago. I've probably ridden it 4 times. I stupidly sold the original...

Interesting that it has 700C wheels. I believe all the US compact models were 650C. They were replaced by the Feminine frames in 2001, which could be either 650C or 700C. Sounds like you are getting the bike sorted out to your liking. Your mods all sound reasonable to me. I have several...

I would try to keep a Black Lightning as original as possible, especially if it's from 1987 or 1988 as they were higher up in the line and had better parts than the later ones. I believe they all came with Wolber rims, which are getting hard to find for a reasonable price. I'd begin by looking...

Seems likely that it's a 1998 European model. 1997-8 models had the CAAD decal on the top tube. It moved to the seat stays for 1999. Is it CAAD2 or CAAD3? May be a compact frame. The 49 compact had a 50 cm top tube while the 50 cm standard road frame had a 52 cm top tube. Does it have...

Hi Tim. What needs attention?

Brian, what about 3D printing? Might be a lot cheaper than the original die cast. I would make both sides the same as the right hand, with both sides having the steel part passing through the spacer that has the radius to fit the down tube. This would eliminate the threaded boss breaking off...

If you see a 22" or 25" SH, let me know.

Here's the only one I found at home, may have something else at the shop. It has a 26.2 clamp (guessing that's so you can use 26.0 or 26.4 bar), 100 mm extension, and made for a drop bar. A Cinelli model 64 and an Ergo bend 26.0 Bontrager slipped in without binding. Needs a repaint to look nice.

A typical hybrid/MTB model, probably made by HL: https://www.ebay.com/itm/New-25-4mm-Quill-Stem-120mm-30-Degree-25-4-Black-1-Bike-Neck/263993452267?hash=item3d773c66eb:g:InoAAOSwKCZbxl4T:sc:USPSPriority!61345!US!-1

Here's an interesting TTT, but the clamp would need modification to take a drop bar: https://www.ebay.com/itm/New-Old-Stock-3T-Roller-Guide-Stem-Chromoly-Steel-Tubing-w-Black-Enamel-Finish/272741580817?hash=item3f80aa4011:g:3-MAAOSwTAZdNjUv:sc:USPSPriorityMailPaddedFlatRateEnvelope!61345!US!-1

Are you picky about rise angle and clamp diameter? There are lots of MTB and hybrid stems out there that are similar. Most are going to have an extension with rise and will have a 25.4 clamp. Plenty of 25.4 drop bars exist, so the clamp diameter is not a big deal if you're not picky about the...