JohnnyD
Well-Known Member
I am looking for a few small parts for '94 Delta V 600. I am looking for the indexing plate,plastic washer and the hinged cover and snap ring that go on the Headshok fork. I don't have pictures of the actual parts that are missing. The only place I have found that has them is in a drawing in the Headshok Service Manual that you can find online at https://www.sheldonbrown.com/cannondale-headshok/headshok_service_manual_en.pdf . On page 27 fig. #4 you will see the parts I am missing. They are part #100951 (snap ring) ,#100952 (hinged cap) ,#100956 (plastic washer) , #100957 (indexing plate).
The fork works and hold air(needs new boot), but it does have some light binding when cycling the fork by hand off the bike..I would like to upgrade and rebuild the fork to a DD5060. So if anyone has the kit hidden in their stash of parts I'd like to hear from you.
The fork works and hold air(needs new boot), but it does have some light binding when cycling the fork by hand off the bike..I would like to upgrade and rebuild the fork to a DD5060. So if anyone has the kit hidden in their stash of parts I'd like to hear from you.